|
Stand-alone
Systems (Full/Half
Step) |
 |
3 Amp, Single and Dual Axis
Full/Half Sub-systems
SAX/DAX; Complete, single and dual
axis, stepper motor control systems with RS-232/RS-422 serial input, 3 amp per phase
bi-polar chopper drivers and an integral 40 volt power supply (100VA) in a single
enclosure for "plug-and-play" operation. For small footprint requirements, a
compact version SAX-4X4 (4"x4"x4") is also available.
|
|
Stand-alone Systems
(Microstep) |
 |
4 Amp, Single and Dual Axis
Microstep Sub-systems
MAX-410/MAX-420; Full function, single and dual axis,
microstep positioning systems with integral driver (4 amps) and power supply (40Vdc/90VA).
Step resolution ranges from 400 to over 50,000 steps per revolution. Units include short
circuit, over temperature and under voltage protection. Serial communications protocol is
RS-422. Encoder feedback is available for closed-loop control.
|
 |
4/8 Amp, Single Axis Microstep
Sub-systems (CE Certified)
CMAX-410/CMAX-810; High precision, 4 and 8 amp
microstep positioning systems certified to EMC Directive 89/336/EEC. They include all the features of the MAX Series product line plus extensive
power line filtering and surge protection. Motor outputs are also EMI suppressed.
CE certificate
|
|
Power
Drivers |
 |
4 Amp Microstep Drivers
DR-4M/DR-4MPS; 4 amp stand-alone, microstep
drivers, packaged with or without power supply. Resolution settings are programmable from
1/2 step to 1/256 step. Stepper motor run and hold currents can be set manually. Both units are
short circuit, over temperature and under voltage protected.
|
|
4/8 Amp Microstep Drivers (CE
Certified)
CDR-4MPS/CDR-8MPS; Stand-alone, 4 and 8 amp
microstep drivers with power supply (40 and 80 Vdc), certified to EMC Directive
89/336/EEC. They include all the features of the DR-4M series product line plus extensive
power line filtering and surge protection. Motor outputs are also EMI suppressed.
CE certificate
|
Data
Sheet
Manual